Steel Plant
High-precision forged and machined parts made for the punishing, ever-changing conditions inside steel plants.
View industryIndustries · 06 segments
Engineered for six demanding sectors.
From steel plants to farm machinery, our forged and machined components are built for the conditions each sector puts them through.
SEG-01
SEG-02
Railways
Forged and machined parts crafted to perform under the rigorous, safety-critical demands of the railway industry.
View industrySEG-03
Pump Industries
A proven record in precision manufacturing lets us adapt quickly to the changing needs of a dynamic pump market.
View industrySEG-04
Agriculture
Agricultural spare parts known for consistent quality and availability, built to keep machines in the field.
View industrySEG-05
Hydraulic
Components for efficient, reliable fluid power, from high-pressure pumps to advanced valve systems.
View industrySEG-06
Overhead Crane
Parts for overhead and EOT cranes that load and unload heavy components efficiently, with every safety measure.
View industryAt a glance
Where our parts go, sector by sector.
| Industry | Where our parts work | Typical parts | What matters most |
|---|---|---|---|
| Steel Plant | Raw material handling, Sinter plant & blast furnace, Melt shop & caster, Rolling mills | Bearing blocks, DPC rollers, Shafts, Couplings & hubs | Heat, scale and dust |
| Railways | Rolling stock, Track & fastening systems, Track maintenance machines, Workshops & depots | Pins, Bushes & sleeves, Brackets & housings, Shafts | Fatigue life |
| Pump Industries | Centrifugal pumps, Slurry & process pumps, Borewell & submersible, Pump drives | Pump barrels & bodies, Pump shafts, Shaft sleeves, Coupling hubs | Concentricity |
| Agriculture | Tractors, Harvesters, Implements, Gensets & irrigation | Sprockets, Gears, Splined & PTO shafts, Linkage arms & brackets | Dust, mud and wear |
| Hydraulic | Hydraulic cylinders, Pumps & motors, Valves & manifolds, Power packs | End caps & glands, Pistons, Rod eyes & clevises, Valve bodies & manifold blocks | Tight tolerances |
| Overhead Crane | End carriages, Hoist, Long & cross travel, Hook block | Bearing blocks, Wheel axles, Drum & gear shafts, Gear coupling hubs | Shock and overload |
Across every sector
The same way of working.
01
Made to your drawing
Every part is built to the customer's drawing, material and quality requirements.
02
Forged and machined in-house
Strength from forging and accuracy from machining, under one roof.
03
Parts or sub-assemblies
We supply single components or complete sub-assemblies, ready to fit.
04
Quick new parts
In-house design and automation let us bring up new parts and variants fast.
Materials
Common grades for the parts we make.
We always follow the grade on your drawing. This is a guide to what is typical for each kind of part.
| Grade | Type | Typical parts |
|---|---|---|
| EN8 (080M40) | Medium-carbon steel | Shafts, pins, hubs and general machined parts |
| EN9 (070M55) | Higher-carbon steel | Sprockets, rollers and wear parts |
| EN19 (709M40, ≈42CrMo4) | Chromium-molybdenum alloy steel | Highly stressed shafts, axles and gears |
| EN24 (817M40) | Nickel-chromium-molybdenum alloy steel | Heavy-duty shafts, axles and gears |
| EN353 / 20MnCr5 | Case-hardening steel | Gears, pins and bushes that need a hard, wear-resistant surface |
| SS410 / SS304 | Stainless steel | Pump shafts, sleeves and corrosion-exposed parts |
| SG iron / cast steel | Ductile iron and cast steel | Bearing housings, pump bodies and brackets |
Manufacturing route
How a part is made, step by step.
01
Drawing review
Material, tolerances, quantities and inspection needs checked up front.
02
Blank
Forging, bar or plate, chosen for the strength and size the part needs.
03
Rough machining
Stock removed with allowance left for the final operations.
04
Heat treatment
Hardening, normalising or case hardening, where the drawing specifies it.
05
Finish machining
Bores, journals, faces, keyways, splines and threads brought to final size.
06
Assembly, inspection & dispatch
Assembled if required, checked against the drawing, protected and packed.
Quality
What we check.
- Dimensional inspectionSizes, positions and fits checked against the drawing.
- Bores, journals and threadsBearing seats, keyways, splines and threads gauged.
- Runout and concentricityRotating parts checked so they run true.
- HardnessChecked where the drawing specifies heat treatment.
- Surface finishSealing, bearing and sliding faces as called out.
- Protection and packingRust protection and packing for storage and transit.
FAQ
Common questions.
Do you only work in these six industries?
No. These are where most of our parts go, but we make general engineering components to drawing for other sectors too.
Do you work to customer drawings?
Yes. We manufacture to your drawing, and our engineers can suggest changes that make a part easier or more economical to make.
Can you supply sub-assemblies?
Yes. We have moved from single parts to designing and building complete sub-assemblies.
Where are you located?
Plot No-17D, Metal Park, Phase-1, Rawabhatta, Raipur, Chhattisgarh.
Don’t see your industry?
We make general engineering components to drawing. Tell us what you need.